Description
The 292-130B is the largest model in the range: a Koop 292 diesel engine, a 1300 mm flail deck with 48 hammer blades, and a 570 kg reinforced chassis fitted with working LED lights for dawn, dusk and tunnel work. Built for municipal crews and contractors, this heavy-duty remote control lawn mower clears wild slopes, river banks, embankments and forest undergrowth in sweeps nearly one and a half metres wide. Twin 1500 W travel motors on a 48 V system, a 10-litre diesel tank and a 5000 W generator give it the endurance and torque of a small tractor, while the 0 - 7 km/h speed range keeps productivity high across large sites.
The machine is operated entirely by remote control within a 680-metre radius. One person controls travel, cutting and lifting from a protected position, which removes the operator from flying stones, dense brush and steep ground. For contractor work on hazardous terrain, this remote control lawn mower replaces risky hand trimming along ditches and embankments.
A gasoline or diesel engine and an electric drive work together in a series hybrid arrangement. The engine runs at its most efficient point and powers the generator, while the motors deliver the pulling force. The result is quiet creep speed, strong low-end torque for thick stems, and simpler maintenance than a fully mechanical hydrostatic drive.
The cutting head lifts and lowers remotely across a 0 - 700 mm range, letting the machine climb over terrace edges, kerbs and irrigation ridges without a ramp. Slope capability reaches 45 degrees, and travel speed up to 7 km/h shortens transit between work areas. The 48-blade flail rotor, engineering-rubber crawlers and V-belt transmission are all specified for continuous heavy-duty cutting, day after day, on this remote control lawn mower.
Typical jobs include orchard and vineyard row maintenance, roadside and embankment clearing, photovoltaic farm vegetation control, and reclaiming overgrown wasteland where wheeled machines struggle for grip.
Running costs stay low. The engine works at a constant, efficient load to feed the generator, the electric motors waste little energy in stop-and-go cutting, and the controller needs no licence or special training to operate. One person with this machine completes work that used to occupy a small grounds crew with hand tools.
As a Chinese source factory, XZYM supports OEM configuration, spare-parts supply and technical guidance for this remote control lawn mower. Each machine passes multiple quality gates covering materials, welding, the electric drive system, engine run-in and real field cutting tests before it is packed for shipment.
| Parameter | Value |
|---|---|
| Application | wasteland; weeds; slopes; orchards; gardens; lawns; etc. |
| Overall Size (L x W x H) | 2080 x 1380 x 980 mm |
| Package Size (L x W x H) | 2180 x 1480 x 1180 mm |
| Net Weight | 570 kg |
| Packed Weight | 719 kg |
| Cutting Width | 1300 mm |
| Operation Mode | remote control |
| Travel Speed | 0 - 7 km/h |
| Maximum Working Slope | below 45 degrees |
| Power Charging | engine self-generating system |
| Lifting Method | remote control lifting |
| Cutting Height Adjustment | 0 - 700 mm |
| Travel Mode | electric crawler drive, self-propelled |
| Maximum Remote Control Distance | 680 m |
| Fuel Tank Capacity | 10 L |
| Travel Motor Rated Power | 1500 W x 2 |
| Travel Motor Working Voltage | 48 V + 12 V |
| Generator Rated Power | 5000 W |
| Engine Brand | Koop |
| Engine Type | diesel 292 |
| Starting Method | electric start |
| Fuel | 0# diesel |
| Track Material | engineering rubber |
| Blade Type | 48 flail blades |
| Transmission | V-belt |
| Standard Configuration | Koop diesel 292 engine; two 1500 W travel motors; 5000 W onboard generator; 48-blade flail rotor; V-belt transmission; engineering rubber crawlers; LED work lights; industrial remote controller. |
| Control Functions | remote engine start and stop, remote travel (forward / reverse / speed), remote cutting engagement, remote deck lifting (on models equipped with lifting). |
| Drive System | series hybrid layout - the engine drives the onboard generator and the generator powers the electric travel motors; the engine self-generating system keeps the battery charged during operation. |
| Package | packed according to the package size and packed weight listed above. |
| Notes | specifications are taken from the manufacturer's datasheet; final configuration is confirmed at order confirmation. |
FAQ
We are a professional manufacturer of remote control crawler mowers. We own our production workshop and R&D team, supporting OEM & ODM customization.
Our crawler mowers are specially designed for slopes up to 50°, suitable for hillsides, orchards, vineyards, mountains and other complex rough terrain grass cutting.
Normally our MOQ is 1 unit for standard models. For customized orders, we can negotiate the minimum quantity according to your requirements.
We provide 12 months warranty for main parts. During the warranty period, we supply spare parts for free if there are quality problems caused by our factory.
Standard models can be delivered within 7–15 working days. For bulk or customized orders, the lead time is about 25–35 working days after receiving your deposit.
Your Reliable Partner in Global Automotive Parts Export
Fenghuang Industrial Park, Liaocheng Development Zone, Shandong Province
Shandong Xinzhuoyuan Machinery Equipment Co., Ltd. © All Rights Reserved
