Description
The 224-55A is the most compact tracked remote control lawn mower in the range, built around a 224 cc Loncin gasoline engine and a pair of 500 W electric travel motors. Its crawler chassis measures only 920 mm long by 960 mm wide, yet it carries the same industrial remote control and self-generating electrical system as the larger models. That makes the machine a natural choice for villa courtyards, garden paths, orchard rows and narrow estate grounds where a full-size remote control lawn mower would struggle to turn around. At 131 kg net it loads into a pickup bed or small trailer without a loading ramp.
A 680-metre industrial remote control puts the whole machine at the operator's fingertips: engine start, forward and reverse travel, blade engagement and deck height are all handled from a safe distance. Because the mower is guided remotely, nobody has to stand on a slope or in front of heavy brush to cut it down.
Power flows from engine to generator to motor. Because traction is electrical, the mower reacts to the controller instantly, holds a steady crawl in heavy growth, and is always ready to restart without idling. The self-generating system also means the machine starts reliably at the beginning of every season, with no flat starter battery after storage.
The 550 mm cutting head adjusts its header from 10 to 180 mm, with cutting height between 20 and 180 mm, so the machine can clear scrub or trim lawn edges with equal control. Crawler drive keeps it planted on slopes of up to 45 degrees, while speed is limited to a precise 0 - 3 km/h for work in tight spaces. A 1.9-litre fuel tank and 2000 W generator keep this remote control lawn mower running through a full working shift.
From courtyard lawns to hillside orchards, from photovoltaic stations to river-bank weeds, the machine covers the full range of vegetation management tasks that used to demand hand-held brush cutters.
Maintenance is deliberately simple. Daily checks are limited to engine oil, the air filter, track tension and blade condition, while the electric drive carries no clutch or gearbox oil to change. The open chassis layout leaves every major component within wrench reach, so routine service is a short job rather than a workshop day.
Shandong XZYM Mechanical Equipment Co., Ltd. has specialised in lawn-mower research, development and manufacturing since 2019, covering robotic, remote-controlled, crawler and rough-cut models. Strict quality control runs through material selection, assembly and final testing, so each remote control lawn mower leaves the factory ready for export and continuous field work.
| Parameter | Value |
|---|---|
| Application | wasteland; weeds; slopes; orchards; gardens; lawns; etc. |
| Overall Size (L x W x H) | 920 x 960 x 530 mm |
| Package Size (L x W x H) | 1100 x 1080 x 720 mm |
| Net Weight | 131 kg |
| Packed Weight | 168 kg |
| Cutting Width | 550 mm |
| Header Height Adjustment | 10 - 180 mm |
| Cutting Height | 20 - 180 mm |
| Travel Speed | 0 - 3 km/h |
| Maximum Working Slope | 45 degrees |
| Power Charging | engine self-generating system |
| Operation Mode | remote control |
| Travel Mode | electric crawler drive, self-propelled |
| Maximum Remote Control Distance | 680 m |
| Fuel Tank Capacity | 1.9 L |
| Travel Motor Rated Power | 500 W x 2 |
| Travel Motor Working Voltage | 24 V |
| Generator Rated Power | 2000 W |
| Engine Brand | Loncin 224 cc |
| Engine Configuration | vertical shaft, four-stroke |
| Starting Method | pull start / electric start |
| Fuel | 92# gasoline |
| Standard Configuration | 224 cc Loncin gasoline engine (pull / electric start), two 500 W travel motors, 2000 W onboard generator, engineering rubber crawlers, industrial remote controller. |
| Control Functions | remote engine start and stop, remote travel (forward / reverse / speed), remote cutting engagement, remote deck lifting (on models equipped with lifting). |
| Drive System | series hybrid layout - the engine drives the onboard generator and the generator powers the electric travel motors; the engine self-generating system keeps the battery charged during operation. |
| Package | packed according to the package size and packed weight listed above. |
| Notes | specifications are taken from the manufacturer's datasheet; final configuration is confirmed at order confirmation. |
FAQ
We are a professional manufacturer of remote control crawler mowers. We own our production workshop and R&D team, supporting OEM & ODM customization.
Our crawler mowers are specially designed for slopes up to 50°, suitable for hillsides, orchards, vineyards, mountains and other complex rough terrain grass cutting.
Normally our MOQ is 1 unit for standard models. For customized orders, we can negotiate the minimum quantity according to your requirements.
We provide 12 months warranty for main parts. During the warranty period, we supply spare parts for free if there are quality problems caused by our factory.
Standard models can be delivered within 7–15 working days. For bulk or customized orders, the lead time is about 25–35 working days after receiving your deposit.
Your Reliable Partner in Global Automotive Parts Export
Fenghuang Industrial Park, Liaocheng Development Zone, Shandong Province
Shandong Xinzhuoyuan Machinery Equipment Co., Ltd. © All Rights Reserved
