195-100 Diesel Tracked Remote Control Lawn Mower

The 195-100 brings diesel economy to large-area cutting: a Koop diesel 195 engine drives a 1000 mm flail deck fitted with 60 blades, 20 straight and 40 Y-shaped, that mulch tough weeds, brush and crop residue into fine pieces. At 390 kg net weight on a 1770 mm body, this diesel remote control lawn mower is built for wasteland reclamation, orchard floor management and large turf areas where gasoline units burn through fuel too quickly. The 5.5-litre diesel tank, twin 800 W travel motors and 48 V self-generating system give the machine steady all-day endurance, and the cutting head lifts remotely through a 0 - 450 mm range.

A 680-metre industrial remote control puts the whole machine at the operator's fingertips: engine start, forward and reverse travel, blade engagement and deck height are all handled from a safe distance. Because the mower is guided remotely, nobody has to stand on a slope or in front of heavy brush to cut it down.

Power flows from engine to generator to motor. Because traction is electrical, the mower reacts to the controller instantly, holds a steady crawl in heavy growth, and is always ready to restart without idling. The self-generating system also means the machine starts reliably at the beginning of every season, with no flat starter battery after storage.

Cutting width is a full metre, with the deck adjustable from 0 to 450 mm for anything from scalping scrub to trimming established turf. Speed runs 0 - 5 km/h and the machine works slopes steeper than 50 degrees. The 60-blade flail rotor tolerates stones and woody stems that would damage a plain blade, keeping this remote control lawn mower productive in the roughest ground conditions.

From courtyard lawns to hillside orchards, from photovoltaic stations to river-bank weeds, the machine covers the full range of vegetation management tasks that used to demand hand-held brush cutters.

Maintenance is deliberately simple. Daily checks are limited to engine oil, the air filter, track tension and blade condition, while the electric drive carries no clutch or gearbox oil to change. The open chassis layout leaves every major component within wrench reach, so routine service is a short job rather than a workshop day.

Shandong XZYM Mechanical Equipment Co., Ltd. has specialised in lawn-mower research, development and manufacturing since 2019, covering robotic, remote-controlled, crawler and rough-cut models. Strict quality control runs through material selection, assembly and final testing, so each remote control lawn mower leaves the factory ready for export and continuous field work.

Technical Specifications